Arkray Glucocard X-Meter Manual de usuario descargar pdf (Pagina 25)

- -

*Do not connect the cable to a meter at

this stage.

6.6 How to change meter setting

Set the time and serial number of a meter before you connect it to this software for the first time.

●

Procedure ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・

1. When you click [Maintenance] on <Main Menu>, <Maintenance Menu> appears. Click

[Meter set-up] on <Maintenance Menu> to display <Meter set-up>.

2. Connect the cable to communication port of your PC.

3. The message “Connect a meter to receive the settings” appears, then, connect a meter.

Once the meter is connected, the power turns on automatically.

4. Once the meter power turns on, data transmission starts automatically. After data

transmission is completed, a message suggesting you remove the cable will appear.

Remove the cable from the meter, then, click [OK].

5. Current setting status of the meter appears.

Change the setting, if necessary, then, click [Write].

Interface Cable

P C

*Be sure to connect the meter when the display shows “Connect a meter to receive the

settings.” When other messages are displayed, information set in the meter will not be

transmitted to PC.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 67 68

Sin comentarios

Arkray Glucocard X-Meter Manual de usuario Pagina 25