Arkray Glucocard X-Meter Manual de usuario descargar pdf (Pagina 28)

- -

7. Data Reception

7.1 How to receive data

*Follow the instructions on the screen when you receive data from a meter. Removing the

connected cable or turning off the meter may result in a failure.

* The instruction below is a case where the unit is set to mg/dL.

●

Procedure ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・

1. Click [Data Reception] on <Main Menu>.

2. <Select patient for data reception> appears. Click a patient whose data you want to receive,

then click [Select].

* <Select patient for data reception> appears only when you have selected “Patient” under

Data management method on <Basic information registration>. When you have selected

“Serial number”, go to Procedure 3.

3. <Waiting for communication> appears. Connect a cable to a meter.

4. Your computer automatically receives measured data from the meter. When all the data

reception from the meter is completed, <Completed reception> appears, then, the received

data are displayed on <Received data display>.

5. Remove the cable from the meter.

*Be careful not to receive a wrong patient’s data.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 67 68

Sin comentarios

Arkray Glucocard X-Meter Manual de usuario Pagina 28